C3 Aircross 2019 - Headlights
Posted: Mon Jan 06, 2020 10:56 am
Hi Guys,
Just looking for some advice, not sure if anyone else has tried something similar. I'll give a little back story to try and help too.
I've bought a C3 Aircross (Origins Model) and I want to change the Halogen headlights to LED bulbs. (links below) (I did this with my previous C4 and had no issues).
H7 - Headlight and Dip Beam - https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
H8 Fog/Turning Light - https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
I've managed to change the H7 main beam headlight no problem, the dipped beam is proving more of an issue because there isn't space at the back of the bulb for the additional room a LED bulb takes up (speaking to LED manufacture NOVSIGHT to see if anything can be done to improve the size of LED bulb and keep the power output)
However, the H8 fog light bulb is where i'm getting stuck, literally, it's stuck! by looking online, and at the replacement LED bulbs, there's 3 markers that would hold it into place, it should just be a case of twist and pull. I'd say i'm fairly strong buy if i put any more pressure on to try and turn that bulb, it's going to break... Am i doing something wrong?
Any help or advice is appreciated
Just looking for some advice, not sure if anyone else has tried something similar. I'll give a little back story to try and help too.
I've bought a C3 Aircross (Origins Model) and I want to change the Halogen headlights to LED bulbs. (links below) (I did this with my previous C4 and had no issues).
H7 - Headlight and Dip Beam - https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
H8 Fog/Turning Light - https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
I've managed to change the H7 main beam headlight no problem, the dipped beam is proving more of an issue because there isn't space at the back of the bulb for the additional room a LED bulb takes up (speaking to LED manufacture NOVSIGHT to see if anything can be done to improve the size of LED bulb and keep the power output)
However, the H8 fog light bulb is where i'm getting stuck, literally, it's stuck! by looking online, and at the replacement LED bulbs, there's 3 markers that would hold it into place, it should just be a case of twist and pull. I'd say i'm fairly strong buy if i put any more pressure on to try and turn that bulb, it's going to break... Am i doing something wrong?
Any help or advice is appreciated